What different spinners look like. What is it, what is the point and how it works. How much is a regular model
Most likely, you recently saw that someone is twisting a strange object in their hands, similar to a small propeller, this is called spinner (English fidget spinner).
Spinners, fidget spinners, turntables - an anti-stress toy consisting of a bearing in the center and several body petals. It is usually held by the thumb and middle fingers, and spins up with a small click.
There are hundreds of varieties of spinners, each different in color, size, design, and the price can vary from a couple to hundreds of dollars. Spinners can be found everywhere and in many people, from a bored child in the yard to people in expensive suits with unusual, luminous gadgets in their hands.
In this article we will tell you everything you need to know about the new hobby - how spinners work, how to find the one that suits you and why they are needed.
A toy? Why and for what spinners are needed
Nervous people or just fidgets who fidget all the time, click with a ballpoint pen, tap on the table with their fingers, tap on the floor with their feet, bite their nails, etc. The list goes on and on, everyone knows such people, and many themselves have similar habits that annoy others. Spinners are designed to channel this strange energy and need to do something into a completely harmless channel. Although people who do not have such habits, they say that spinners help them focus.
Spinners perform the same function as traditional "Chinese health balls." It is reported that spinners help people with autism and attention deficit hyperactivity disorder to focus. It is believed that vibration and sound from a spinning spinner create a therapeutic effect. In any case, everyone finds something in their spinners.
How the spinner works and works
Spinners do not require batteries to rotate, although many are equipped with LEDs. Each spinner has a bearing in the central axis (more about bearings later) and to make the spinner spin, it takes only one click of a finger. Basically, the central part is held between the thumb and the middle finger, and the “lead” with the index finger, although you can begin to rotate it with the other hand or in general any way and in any direction. Sometimes the spinners are not even in the hands, but spin in the palm of the hand or on the table, one hand holds the spinner, and the other unwinds, this allows you to significantly accelerate and increase the rotation time.
Cap
The part that is inserted or screwed into the center of the bearing, which allows you to securely hold the spinner with your fingers. Without a bearing cap, it will be very difficult to hold the spinner during rotation.
Frame or housing
The part of the spinner that rotates around the central bearing. The body types and petals are described in more detail below.
Bearing
The bearing is located in the center of the spinner and looks like a small ring with metal or ceramic balls inside. Bearings have their own quality rating - ABEC, the higher the rating, the faster and longer it will rotate. Only the central bearing is used in the spinner, the outer bearings serve more as a decorative function and additional weight distribution for better balance.
Rotation time matters
The spinner spin time, after unwinding, may not matter to you, but for enthusiasts, this is the main indicator of the spinner quality. These hardcore drivers use high-quality bearings, precise balance, and the right materials just to keep the spinner spinning for as long as possible.
This may seem inconsequential, but believe me, as soon as you spin your first spinner, you will be surprised at how fast you want the spinner to spin faster and longer.
Of course, most people will be satisfied with the standard features, but enthusiasts are simply trying to squeeze a lot more out of it. Although the initial five-dollar spinner can spin for a minute or even two if you're lucky. While the highest quality and most expensive models rotate for tens of minutes.
Types of Spinners
Single
This is the simplest spinner design, which consists of one small bar with a bearing in the center. The advantage of this design is its compactness, since it is much smaller compared to a typical tri-spinner. These spinners stand out from the rest, but don't let their size mislead you, some of these little spinners can spin for five minutes!
Tri-spinner
This is the most common design among all spinners. Outwardly resembles a clover with three leaves, in the center of which is a bearing. It often happens that the bearings are on each lobe, all this is done for the balance and weight of the spinner. The designs are very different from each other, some resemble a propeller or a ninja star, etc. Three spinners are assembled, usually from plastic, metal and wood, although there are options from leather.
Quad spinner
With the success of the tri-spinner design, it was only a matter of time before someone created a four-leaf spinner. They may look like crosses, mills or more complex designs. The quad spinner has better stability and smoother rotation, but not everyone will like more weight and size.
Wheel
Instead of petals, the spinner has a completely round shape, like a wheel. These spinners look like wheels from a cart or car.
Exotic
Unlike anything else spinners that are difficult to classify. Some of them are triangular or have rounded shapes, there are even asymmetric ones. Others may even have small, built-in, freely rotating steel balls or mechanisms. The only thing they have in common is their originality. Some of them may be small in size, like a coin, while others are huge and may resemble a miniature medieval instrument of torture.
Many of these spinners are made of exotic metals such as Mokume Gane, Damascus steel, zirconium, tungsten and others.
3D Printed
A special type of spinners, the frame of which is printed on a 3D printer, can be of any of the above types. It is printed and assembled in just half an hour or an hour. There are hundreds of ready-made drawings online, a bunch of groups on Facebook and VKontakte, where people share ready-made spinners or print them to order.
What to consider when buying a spinner
Aesthetics
As with any hobby, people want to be able to express their personality. Spinners have many styles, starting with the standard and most common tri-spinner and ending with stars like the ninja and betman. Some spinners will be more convenient, but the appearance and aesthetics are of great importance when choosing your first spinner.
Sensations of vibration and rotation
Regardless of the materials of manufacture, spinners vibrate during rotation, some may like it better, others vice versa. The only thing that strongly affects vibrations is the bearings and the spinner material, the faster the spinner rotates, the more vibrations and the louder the sound. Another option is slow and fast-extinguishing spinners, when you need silence and want to unnerve others as little as possible. In any case, you have to choose between these two options, but if you want a minimum of vibration, look towards ceramic and hybrid bearings.
The spin volume also affects the rotation volume. Cheap plastic, usually quieter, heavier metal spinners, however, as mentioned above, a lot depends on the bearing.
While enthusiasts are looking for spinners with a long rotation, on the other hand there are people who, on the contrary, want to feel the spinners vibrate and spin them as often as possible, they like the process of spinning and feeling. Such people choose spinners primarily because of their appearance or sensation of vibration, in any case, only by spinning the spinner can you understand whether it suits you or not.
Ergonomics
There is one thing that cannot be ignored in the spinner, its ergonomics. Some designs are created more for an amazing appearance, while others for a comfortable hold, a balance between them is difficult to find. For example, there are many spinners that look amazing, but when untwisted, they feel tough and uncomfortable. Heavy spiners can cause discomfort after a day of use, so plastic and wood are better suited if you are looking for a quiet spin.
Spinner price
Cheap spinners for $ 5-20 are likely to be printed on a 3D printer or assembled in China, but this does not mean that they are bad, they are simple and work well. For $ 20-50, you can count on the middle segment of spinners, which uses expensive and high-quality bearings and expensive metals: copper, brass, aluminum, etc. Everything that costs more than $ 50 is considered to be high-quality, sometimes unique, limit hand-assembled spinners.
Bearings
There are a large number of types of bearings and it is very easy to get confused in them, that's why they introduced ABEC rating for bearings. The higher it is, the faster and longer the spinner will spin. However, the faster it spins, the potentially louder it can be.
608 and r188 bearings
The most common type of bearing is 508, and can also be found on roller skates and skateboards. Another type of bearing is called R188 and it is faster, but less stable due to the smaller inner diameter, such as usually found on high-speed spinners. Despite their impressive rotation times, R188 bearings are generally more difficult to clean and maintain. In addition, they are more expensive, because they are not as common as 508 bearings.
Steel
Most bearings are made of steel and contain steel balls inside. These bearings are mounted on simple spinners and require little maintenance and attention.
Ceramic
Ceramic bearings contain tiny ceramic balls inside that soften vibrations and make rotation smoother. Ceramic bearings are more expensive than steel bearings and are great for silent spinners and minimal vibrations.
Hybrid
Hybrid bearings are a cross between steel and ceramic. Balls can be either steel or ceramic. Great balance between price and vibration.
You probably noticed that many spinners have three or four bearings that are located closer to the edge. These bearings do not work and serve to distribute weight and aesthetics. If you pull them out, you will notice how slowly the spinner began to spin.
Video demonstrating how bearings affect rotation time:
Cheap spinners vs expensive
The difference is actually not that big, but the features listed below will probably become an argument for you to spend a little more money than you expected.
Rotation time
For hardcore enthusiasts, rotation time matters most. High-speed spinners can spin for five to ten minutes. As a rule, this is achieved by using heavy metals in the construction: steel, copper, brass. Add to this high-quality and accurate bearings and understand why they rotate faster and longer than cheap three-spinners, in which bearings are rated ABEC-1.
Rotation smoothness
High-quality spinners have a smooth rotation, all thanks to R188 bearings with a high ABEC rating. Some of them may have ceramic bearings and a well thought out design, which affects the smoothness and rotation of the spinner. The time and smoothness of rotation are affected by and.
Quality and precision
As already mentioned, the creation process, material processing and accuracy, all this affect the spinner rotation speed. High-quality spinners are made on CNC machines that allow you to process surfaces with high accuracy. Not to mention the appearance and unusual designs.
Durability
The use of metals in spinners such as aluminum, steel or brass allows them to last longer and be more resistant to mechanical damage than cheap plastic spinners. As long as you service or replace bearings as needed, metal spinners can last a lifetime.
Rare and beautiful appearance
Despite the fact that in the middle price range there are beautiful spinners, when you look at the most expensive models, you will understand what a unique design is. Such spinners are more personalized, made of exotic materials and have individual original designs.
Where to buy spinners
Why spinners are sold in vapeshop
People who try to quit smoking or switch to steam use spinners to facilitate this not-so-pleasant process. Nervousness and irritability are standard symptoms, so it’s useful to occupy yourself with something, just not to reach for a cigarette, for such moments, spinners are ideal. In addition, spinners are produced by large companies that produce mods and electronic cigarettes.
Most likely, spinners are already sold in the vape shop closest to you and the most correct decision will be to go in and twist them in your hands, choose and understand which one suits you best. Moreover, vapers played a big role in popularizing spinners, so you can safely turn to them for advice.
Online stores
With the growing popularity of spinners, cheap versions assembled in China also appeared on the market. The cheapest can be found for a couple of dollars and maybe this is enough for you. Large online hypermarkets have opened entire sections and offer hundreds of spinner models.
Reddit table with prices and links to manufacturers and sellers of spinners around the world.
| Manufacturer and seller | Photos of models and description | Price (USD) |
|---|---|---|
| Gearbest | Several hundred models, mostly clones | $2+ |
| Aliexpress | A whole section on spinners | $1+ |
| Heavengifts | The middle price segment, but there are also cheap clones | $5+ |
| eBay | Section on eBay | $3+ |
| Rotablade | Rotablade, Stubby, Tri-Stubby, Stubby Light, Pendulum | $45-$200+ |
| MD Engineering | Torqbar | $139-$199 |
| ZeroFeud | Compass, Tri-Compass | $50-$180 |
| FromRussiaWithKnives | Pepyakka 2.0, Pepyakka NVK | $163-$220 |
| Dark apogee designs | Genesis | $155-$200 |
| Vorso spin | Flat top v1 | $145-$195 |
| Revolve makers | Alpha, Bathgate Artifact | $130-$700 |
| VC-EDC | VC Spinner, VC Spinner XL, Triton | $40-$50 |
| NTO-Designs | Ternion, Lil Brass Dog, Tactical Revspin | $60-$180 |
| Supercharger innovations | Sphidget | $40-$195 |
| HR Barrelworks | Custom Munsen Ring, Lantern, Juggernaut | $75-$160 |
| Last room standing | Axis micro | $150-$180 |
| PolarisAT | Troika minim | $50 |
| Bastion gear | Bastion Spinner Small, Large | $50 |
| Zenial | Arrow, Star Ninja, Bar, Trivium | $40 |
| FlyAwayToys | Review of Falcon, Interceptor, The Builder, | $35-$120 |
| Spencer’s Metal Art | Stator | $160 |
| Hammerhead spinner | Hammerhead | $35 |
| United machining | Bow tie | $75 |
| Ables planetary spinners | Nibiru | $250 |
| Black hills precision | Radioactive Isotope .67 | $60-$70 |
| Spaded designs | Blackjack | $125-$190 |
| Scullspinner | Scullspinner | ??? |
| 2R Designs | Boomerang | $50-$95 |
| Ef design | Porcupine | $95 |
| Mad monkey innovations | Rotr | ??? |
A man constantly twists objects in his hands. Unconsciously, we pick up lighters, pens, small objects, if there is nothing suitable, then a person goes through the rings on the fingers. The Internet is littered with gadgets designed to take hands, relieve nervousness; fidget spinner is gaining popularity in the last year.
A woman from Florida came up with a spinner back in 1993; Miss Hettinger was not able to play with the child due to illness and constant fatigue, and so that the child would not be bored, she came up with such a toy. K. Hettinger even had a patent for spinners until 2005, but the invention was not very popular, and there was no money to extend the patent.
The popularity of spinners is increasing every day. At first glance - a simple toy - and at the same time it is impossible to tear yourself away from it. Spinner has a main bearing and several auxiliary ones.
The main function is rotation: the fidget is clamped between two fingers, and the mechanism starts with the second hand.
There are several ways to spin a spinner, mastering new tricks. Overview and detailed recommendations on how to perform and how to quickly learn all kinds of tricks, you can easily find on the net.
In addition to ease of use, the spinner has other advantages:
- Helps in the fight against bad habits (smoking);
- It will help pass the time in line or a long trip;
- Increases sensitivity and dexterity of fingers, helping to improve response;
- Helps fight stress;
- A nice toy to cheer up and have fun.
Types of Spinner
The form
Triangular spinner is most common. It has a main bearing and three at the edges, spinning for about 2 minutes. Good for tricks;Round- simple, in the form of a wheel (most often they are bought for small children), and a complex model that has numerous counterweights thanks to them, the spinner rotation time is increased).
Shuriken- imitates fabulous weapons and looks truly fantastic. The edges are sharp or specifically bent - the producers' imagination knows no bounds;
Rectangularspinner is suitable for fans of minimalism. Two rotating axles, small, compact, without extra parts.
Glows in the dark - such a toy adds even more positive emotions. Creates a beautiful, rotating bright circle in the dark. The glow is not due to the battery, but due to the LED coating. The toy charges in the light or near a lamp.
Sleeve spinners- An original idea, in which the whole bullets or their details are used as a counterweight.
Material
For mass production, plastic is used - an inexpensive and easy to use material. Toys are printed on a 3D printer in absolutely any color and shape. Some resources make toys according to individual sketches.Production woodenspinner takes a lot longer. It is made manually from different types of wood: environmentally friendly, non-toxic - it will delight connoisseurs of exclusive toys. Craftsmen try to make a fashionable pinwheel and at home, on their own. A toy made of plywood costs 60% less.
Spinners metal - durable and reliable, plus they spin the longest. They always look elegant and respectable. Any metal is suitable for manufacturing: brass, copper, aluminum. More expensive are made of steel. Exclusive manufacturers offer titanium alloy; the titanium toy is resistant to deformation and damage, will serve the owner for many years.
With the popularity of turntables, there are also many options and ideas for their manufacture. They make it from whip, bearings and super glue, from cardboard, every day there are more and more new tips on how best and.
Differences between a spinner for adults and a spinner for children
The main difference is that for safety reasons you should not buy a child a heavy metal spinner. Avoid sharp corners and details with which the child may get hurt.It is better to choose a small plastic turntable with well-polished edges. For an adult, the choice is limited only by financial issues and taste preferences.
What to look for when choosing a spinner
The most important part is the central bearing, it is he who sets the speed of rotation.Ceramic are the longest spinning - the most expensive. But they create noise when they spin, which is not always like others. Semi-ceramic, or as they are also called - hybrid - do not create noise, they are affordable and spinning for a rather long time. The bulk of spinners is made on the basis of metal bearings, they are easy to use and reliable.
Manufacturers have introduced a special ABEC bearing rotation rating: the larger it is, the gadget will spin longer.
When choosing the perfect spinner, this parameter will help you navigate and choose a really high-quality product.
It is worth paying attention to the quality of grinding, so that the model does not have roughnesses and flaws. A high-quality spinner will always rotate easily and smoothly, and will not leave damage on the fingers. The hand exercise machine should please and bring pleasure every second of its use.
Where is better to buy a spinner: shop or online
The toy is relatively new, it will take more than one day to find the right store. And not the fact that the store will have a large selection. The plus is that the store has the ability to twist, hold in your hands, check and go home with the purchase.But the store provides up to 10 models, while the network selection is represented by thousands of models. So is it worth taking the first thing that fell into your hands, or is it better to wait and choose the best?
Sitting comfortably at home, without too much haste, review the photo, read the specifications and reviews, determine the price and select the suitable model for all parameters. will amaze the most demanding customers.
In the midst of the popularity of spinners, it is probably hard to find someone who would not hold this thing in their hands, or at least not see it. Even if you are one of those few who still didn’t spin, you probably know that it is an antistress toy, invented in the 90s of the last century as a “distraction” for people with a special form of autism.
For children, as well as for adults with neuropsychiatric problems, this simple invention helps to be distracted, relax, switch attention and thereby less painfully react to the surrounding reality.
Your humble servant still does not understand why normal, completely healthy people need an incomprehensible toy that is constantly fiddled with in your hands, like a rookie gopnik. Although it may not be my mind, this is the case, and fashion is a fashion that must be followed. However, be that as it may, and recently a request appeared in Yandex, sounding “What does a spinner look like for 3,000,000,000,000 rubles?”. At first it was thought that this was a joke, for who needs a toy, even a megapopular one, the cost of which is estimated at 30 trillion rubles. By the way, one trillion is a thousand billion, and the price of the tallest building in the world, which is the Burj Khalifa tower in Dubai, is estimated at 1.5 billion dollars, which is 90 billion rubles. Have you estimated the scale? So, the spinners shown in the photo below should cost from one hundred thousand to one million US dollars, and in Russian rubles it should be from 6 to 60 million.
Spinners on Aliexpress - from the cheapest to the most expensive.
Not so long ago, only a few were aware of spinners, but today, thanks to the Aliexpress platform, the toy has gained worldwide fame. You can order and buy them at LINK BELOW.
By the way, even on Ali you can find a huge number of other toys, which are a good replacement for spinners. Their price varies from 10 Russian rubles and ending with several thousand dollars.
Which are called fidget spinners, captured not only the west, but also Russia and the CIS countries.
It seems nothing unusual, take a spinner (from the English. Spin \u003d rotate) and twist your fingers. And yet, many people liked this thing.
Today you can buy spinners of any size and shape, and the price for them can vary from 300 rubles to several thousand.
In this collection you can find out which fidget spinners are the most expensive today. It's amazing what only people are willing to spend their money on.
The most expensive spinners
10. Spinner "Crusader"
Price: 260 dollars (15 5 00 rubles )
The creator of this spinner is KASFLY. Such toys are sold only on order and in a closed group in one of the social networks. This spinner has a religious pattern, and there are two versions of it - bronze and titanium alloy. The latter option is the most expensive, although the bronze spins longer. During rotation, the spinner looks beautiful, but if you touch the rotating ends, you can earn skin irritation.
9. Spinner "TurbineVersion 3 "
Price: 399 dollars (24,000 rubles)
Metal Worn has begun taking pre-orders for its new spinner made of titanium alloy. The toy is 19 mm thick and 5 cm in diameter. The name of the toy hints at its quiet and long rotation.
The coolest spinners
8. Spinner "TispinProp "
Price: 425 dollars (25,000 rubles)
Titan Ring Designs' product, in fact, is a small propeller. The toy is made of a titanium alloy, which is used in aviation, and more precisely to create propellers. Spinner will not only spin smoothly and for a long time, but also empty your wallet for a considerable amount for such a useless little thing.
7. Spinner "Pepyakka-S "
Price:425 dollars (25,000 rubles)
This spinner was created by FromRussiaWithKnives. The name of the company can be translated as “from Russia with knives”, therefore it is not surprising that in its form it resembles a tool that can deprive a person of limbs at any time. This toy is made very seriously - it uses 20 interacting parts, as well as a double bearing system for a longer and smoother rotation.
This spinner is presented not just as a beautiful toy, but as a "mechanical puzzle" that spinner lovers have to solve.
The most beautiful spinners
6. Spinner "BlackLotusTri "
Price: 445 dollars (26 500 rubles)
If you want a toy that looks like something from the Middle Ages, then this spinner is for you. It was created on a 3D printer and each model of this spinner has its own unique design. This model (Sterling Silver) is the most "sophisticated." To create the main part, it was necessary to make a wax model on a 3D printer, polish it and coat it with tritium powder.
5. Customized spinner from 925 sterling silver and spinner from Weiheng
Price: $ 459 (27,500 rubles)
There are 2 versions of this spinner - one from Sunnytech and one from Weiheng. Both spinners are identical and stand the same. The silver from which they are made betrays a special refinement. In addition, silicone nitride bearings ensure perfect balance and long rotation times.
Photos of expensive spinners
4. Spinner from the company 9 Gear
Price: 600 dollars (36,000 rubles)
There are a huge number of different spinners created by 9 Gear, but this one is made entirely by hand, and can only be purchased from the company's official website. From the name you can understand that the spinner consists of 9 bearings connected to each other. The spinner is made of brass, which means that it will need care, otherwise it will rust. If you want a separate suitcase for your spinner, then get ready to fork out for another 140 dollars (8,500 rubles).
3. Spinner and cigar stand Rotablade
Price: 600 dollars (40,000 rubles)
There are several variations of this sleek fidget spinner, but the most expensive model is made of titanium. Despite its price, there were so many pre-orders for it that the company suspended the possibility of an early order.
2. Spinner "Artifact "
Price: 700 dollars (42,000 rubles)
This spinner is not in vain called "Artifact" - it looks like a real work of art that has come to us from a bygone era. The designer of this toy is Chris Bathgate. The spinner itself is made manually of stainless steel and brass. At the moment, the company has sold all of its "artifacts", despite the considerable price.
The price of the most expensive spinners
1. Spinner "SteelFlameRing "- is no longer produced
Price range: 500 - 1,500 dollars (30,000 - 90,000 rubles)
Derrick Obatake of Los Angeles is a jewelry manufacturer. When the fidget spinners began to gain incredible popularity, he decided to create his own version, and called it “Steel Flame Ring” (from the English “ring in a metal frame”). Several models were created, each of which had its own unique design. Later it was decided to suspend the production of these spinners.
Since these toys are considered rare, the cost of each can reach 1,500 dollars.
A variety of gadgets and toys for children and adolescents never ceases to amaze us. Some of them became so popular that even adults became addicted to them. What toy are we talking about? Of course about the sensational spinner! Despite the simple construction and design, today almost everyone has a gadget.
What does a spinner look like: photos, models, design
Despite the fact that many already have this toy, some still do not know what it is and what design it has. Most models are equipped with stainless and ceramic bearings. There are many different options, with different numbers of petals, from different materials. The cheapest spinner will cost you a couple of dollars, models are more expensive presented at 15-30 dollars.
What is a toy? It was invented several years ago and it was originally intended for people suffering from ADHD, autism. But alas, then it was not widespread. But that all changed last year, when spinners began to be popular with children. Then the gadget attracted the attention of adults. Unlike many other gadgets, it can benefit you: with it, people were able to quit smoking. Spinner relaxes the mind, relieves stress, helps to concentrate. It is recommended for those who have joint problems, it helps to restore finger mobility after injuries.
Interesting information: due to the craze for spinners, American schools have banned children from coming to an educational institution with a gadget. This is due to the fact that children are distracted from school and spin the turntable even in the classroom.
What does a spinner look like? Photo You will find the most popular models in our article. They differ in construction, design, material. We recommend not to save on a gadget and not to buy the cheapest option.
You will like our publication How to use the spinner correctly
The toy has a fairly compact size and fits in the palm of your hand. It is equipped with several blades (they are also petals) and a bearing located in the center. It is thanks to the bearing that the spinner keeps its balance. On sale you will find models with different numbers of petals. The essence of the game is that you have to spin the spinner as fast and longer as possible, in different ways.
As for the variety of models, it is simply amazing. You will find both the simplest options from plastic, and exclusive - from metal, wood, glowing. The most expensive are made of brass, titanium. You should not buy the cheapest plastic models, they rotate worse and often break.
What does a glowing spinner look like?Similar models are especially popular among children and adolescents. Not surprising, because during the movement they create a beautiful stream of light, from which it is simply impossible to take your eyes off. We have presented you some photos, as you can see, this is really a magnificent sight.
How to use the gadget?
You do not have to charge it or buy batteries, as the device has manual control, in other words, you need to turn it with your fingers. The axis is located in the center, you need to place the gadget between two fingers - thumb and middle, then run the toy on a flat surface.
How long can a spinner spin?
Fans of the gadget are competing and each of them wants to increase the speed of rotation. On average, the rotation time takes about two minutes (with regular training and good quality gadget). Some manage to rotate the toy even 8-10 minutes!
If you want your gadget to rotate as long and as fast as possible, pay attention to the presence of slight vibration during unwinding. If it is, the spinner will spin longer. Before buying, be sure to untwist it, as a beautiful design and high price do not always guarantee good quality.
Pay attention to what material the bearings are made of. If you want the gadget not to be too noisy, choose ceramics.
If we talk about the material from which the spinner should be made, refuse to buy a model from plastic. It will last you a short time, besides, you are unlikely to be able to unwind it for 5-10 minutes. The most durable models are aluminum, steel, brass, and wood.
With a spinner, you can perform sophisticated tricks, but for this you need to exercise regularly. Remember that the duration of rotation depends not only on your abilities, but also on the quality of the spinner.
Men's magazine site
